Bengaluru, Karnataka
MES, IIoT and Industry 4.0 Solutions in Bengaluru
Ajinkya Technologies runs its development centre in Bengaluru (HSR Layout), at the centre of India’s most advanced manufacturing and technology ecosystem. For Bengaluru manufacturers in automotive, aerospace, machine tools and electronics, we deliver MES, IIoT, Vision AI and agentic-AI systems that turn a busy shop floor into a connected, measurable operation.
Bengaluru sets a high bar - and our engineering, much of it based in the city, is built to meet it.
Free scoping call. We start with one line, never change your machine logic, and you own the code and the data.
A manufacturing IT partner inside the Bengaluru ecosystem
Bengaluru is home to some of India’s most sophisticated manufacturers and a deep pool of engineering talent. Our development centre in HSR Layout puts our team right inside that ecosystem, close to clients, partners and the latest in industrial AI.
For local manufacturers that means fast, hands-on collaboration: discovery workshops on your shop floor, rapid proof-of-value, and a team that speaks both OT and IT fluently.
- Development centre in HSR Layout, Bengaluru
- Deep experience with automotive, aerospace, machine-tool and electronics makers
- Agentic AI, Vision AI and IIoT engineering talent on the ground
- Rapid proof-of-value and hands-on, on-site collaboration
Advanced solutions for advanced manufacturers
Bengaluru manufacturers often need the most advanced end of our portfolio: agentic AI for autonomous decision support, Vision AI for automated defect detection, digital twins and AI-driven predictive maintenance, on top of a solid MES and IIoT foundation.
We connect machines over OPC-UA, Modbus and MQTT into a Unified Namespace, layer real-time monitoring and OEE, then add AI that does work - predicting failures, inspecting quality and supporting decisions, all with full audit trails.
Bengaluru engineering, global track record
Our Bengaluru team is part of the same organisation delivering Industry 4.0 for clients in the US, Germany, the UAE and Singapore, and managing deployments that track 720,000 material movements per day. Bengaluru manufacturers get a local, responsive partner with a genuinely global track record - and full ownership of everything we build.
Visit or contact our headquarters
Ajinkya Technologies (a brand of Kadle Global Pvt Ltd)#401, 4th Floor, Shri Laxminarayan Arcade, Mahatma Phule Road, Shastri Nagar
Belagavi, Karnataka, 590003, India
Phone: +91 70101 10805
Email: hello@ajinkyatechnologies.in
Frequently asked questions
Do you have an office in Bengaluru?
Yes. Our development centre is in HSR Layout, Bengaluru. Our company headquarters is at #401, 4th Floor, Shri Laxminarayan Arcade, Mahatma Phule Road, Shastri Nagar, Belagavi, Karnataka, 590003, India. Reach us on +91 70101 10805 or hello@ajinkyatechnologies.in.
What do you build for Bengaluru manufacturers?
MES, IIoT connectivity, Vision AI for automated inspection, AI-driven predictive maintenance, digital twins and agentic-AI decision support - tuned for the city’s automotive, aerospace, machine-tool and electronics manufacturers.
How quickly can we start?
We typically begin with a focused proof-of-value on one line or use case, often live within weeks, then scale - with our Bengaluru team collaborating on-site throughout.
Explore related solutions
Common concerns, answered
Will this disrupt production?
No. We connect read only first, install during planned stops, and edge devices buffer data so a network problem never stops a machine. Nothing writes to a PLC without your controls team and a test.
Our machines are old. Do we need to replace them?
No. Old machines are the usual case. A running signal, a cycle signal or a current sensor on the motor is enough to start, without touching the machine program.
We tried a system before and nobody used it.
That is the most common failure, so we design with the operators and supervisors who will use it, start with one report they already fill in by hand, and only extend once they rely on it.
What about IT security?
Read only by default, a segmented OT network, and a review with your IT team before anything connects, following the ISA/IEC 62443 zone approach.
We will not replace SAP or Oracle. Do we have to?
No. We connect to the ERP you already run through its standard interfaces and add what the shop floor is missing. Your ERP stays the system of record.
Do your engineers understand a heavy industrial floor?
Our systems run in steel plants, warehouses and process lines. We start every project by walking the line with your operators and supervisors, and the first release is tested by them, not only by IT.
Are we locked in?
No. You own the source code and the data, documented, in your own repository. Another team can maintain it.
Talk to our manufacturing engineering team
Tell us about your plant, your machines and your systems. We will scope a pragmatic digital-transformation roadmap with measurable ROI.
Step 1
An engineer reads it
Not a sales bot. Our team replies within 24 hours with questions or times for a call.
Step 2
30 minute call
Your process, machines, systems and the number you want to move. We tell you honestly if we are a fit.
Step 3
A written scope for one line
What we would connect, what you would see, how long it takes. You decide; nothing starts without your approval.