Sales: +91 70101 10805|Sales: bdo@ajinkyatechnologies.in
Ajinkya Technologies
SolutionsProductsDemosAnkastraInsightsFor IntegratorsAboutContact
Get Started
Home / Digital Experience Center / End to end traceability

How fast could you say which parts are affected after a complaint? An interactive traceability demo

Follow one heat of metal from the furnace through casting, laser marking, machining, inspection and dispatch to two customers. Then scan a returned cracked part. The record runs back to one alloy lot and forward to the 48 sibling parts, instead of a hold on the 1,920 parts made that week.

Every number, ID and event in this demo is simulated to show how the system behaves. None of it is customer data or a measured result.

What you are looking at

  • Melt: a heat is tapped from the induction furnace. The scrap lot, the ferro alloy lot and the lab chemistry sample are recorded against the heat number.
  • Cast and mark: 48 castings are poured from the heat. Each one gets a laser marked data matrix code that carries its heat and serial number.
  • Machine: each part is scanned at the CNC cell. The machine, program, tool and operator are saved against its serial.
  • Inspect: the measurement results are stored against each serial, not on a sheet for the shift.
  • Pack and ship: serials are packed on four pallets. Two go to one customer, one to a second customer, and one stays in the finished goods rack.
  • Complaint: weeks later one customer reports a cracked part. Scanning its code lights up the genealogy backwards through inspection, machining, casting and the heat, down to one alloy lot and a lab value that was close to its limit.
  • Trace forward: from that lot and heat, every sibling part is found. The 12 still in the warehouse go on hold and the 36 shipped are listed by customer and shipment.
  • Replay without traceability: the same complaint in a plant with no part marking. The trail stops at the delivery note, and the hold covers the whole week: 1,920 parts.

How this maps to a real traceability system

In a real plant the links come from the points you already have: the weighbridge or store issue for raw material lots, the furnace log and spectrometer for heats, a marking station after casting or first machining, a code reader at each machine, your gauges or CMM, and the packing and dispatch scan. We connect those points, usually through the PLCs, machine controllers and the MES or ERP you already run, such as SAP, so the genealogy builds itself as parts move.

We usually start with one product line, mark and scan at two or three points, and prove that a part can be traced back to its heat and forward to its shipment before extending. The same record supports customer audits and customer specific requirements, because the answer to "what went into this part" is a query, not a search through paper.

From real projects

In an integrated steel plant in India, our material tracking covers warehouses, central stores and vendor yards: more than 720,000 material movements tracked per day, and 27 million tons of steel managed annually at a single client site.

Company reported project figure, not independently audited, not a promise for another site.

Questions

What does end to end traceability record?

It links every finished part to what went into it and what happened to it: the heat or batch, the raw material lots charged, the lab result, the machine, program, tool and operator, the inspection values, the pallet and the shipment. With those links you can trace back from one part to its inputs, and forward from one input to every part that carries it.

How does traceability reduce the size of a recall?

A complaint names one part. If that part carries a code, the system finds its heat and lots in minutes, then lists every other part from the same heat and where each one is: on hold in your warehouse or shipped to a named customer. Without that link nobody can say which heat is suspect, so the hold has to cover everything made in the period. In this simulation that is 48 parts against 1,920.

Is the data in this demo real?

No. The heat, lots, serial numbers, lab values, machines, customers and counts are simulated to show how the system behaves. They are not customer data or measured results.

How do you mark castings and machined parts so the code survives?

It depends on the surface and the process. Laser marked or dot peened data matrix codes work on most machined and cast surfaces and can be read after shot blasting if they are placed and sized for it. Where a part cannot carry a mark, the identity rides on the fixture, tray or pallet with a barcode, QR code or RFID tag, and the system keeps the link.

Why does the demo ask for my name and email?

So an engineer can follow up if you want to talk about your own plant. The explanation on this page is open to everyone; only the interactive view needs the form, once.

Free scoping call. We start with one line, never change your machine logic, and you own the code and the data.

Go further

  • RFID and inventory traceability
  • How to set up traceability on a production line
  • How steel product traceability works
  • The main methods of manufacturing traceability
  • Traceability requirements: GS1 and the EU
  • Interactive demo: RFID warehouse
  • Case studies from real projects

Continue the tour

Your one entry opens every demo. See all 8.

3D view from the RFID warehouse demo

RFID warehouse

Where is the pallet your system says you have?

3D view from the Predictive maintenance demo

Predictive maintenance

Your next breakdown is already making noise. Is anyone listening?

3D view from the AI quality inspection demo

AI quality inspection

How many bad parts left your plant today unseen?

Ajinkya Technologies

Smart. Scalable. Secured.

A Kadle Global Pvt Ltd company

Sales: +91 70101 10805 Support: +91 73494 16661 hello@ajinkyatechnologies.in#401, 4th Floor, Shri Laxminarayan Arcade, Mahatma Phule Road, Shastri Nagar, Belagavi, Karnataka, 590003, India

Solutions

  • MES Implementation
  • Agentic AI & Industry 4.0
  • AI Predictive Maintenance
  • Manufacturing AI Agents
  • Computer Vision Quality Inspection
  • IIoT & Unified Namespace
  • Manufacturing Automation
  • Digital Transformation
  • All Solutions

Products

  • Ankastra
  • DailyGate
  • Vision AI
  • Fleet Safety

Locations

  • Belagavi
  • Bengaluru
  • Karnataka
  • Manufacturing Software India
  • UAE Manufacturing
  • Saudi Arabia Manufacturing
  • Singapore Manufacturing
  • Malaysia Manufacturing
  • Malaysia HRMS and Payroll
  • Germany Industry 4.0
  • Manufacturing Software USA
  • Manufacturing AI USA
  • Canada Manufacturing
  • US, Michigan Automotive
  • US, Texas Oil & Gas IIoT
  • US, Arizona Semiconductor
  • For Integrators
  • Partner rules

Company

  • Ajinkya Growth (US Small Business)
  • About Us
  • Careers
  • Founder, Amey Kadle
  • Case Studies
  • Insights
  • Manufacturing Answers
  • Glossary
  • Free calculators and templates
  • 3D demos
  • Traceability requirements guide
  • Blog
  • Contact
  • Customer support
  • Trust and security

Legal

  • Privacy Policy
  • Cookie Policy
  • Terms & Conditions

© 2026 Ajinkya Technologies. All rights reserved.

Part of Kadle Global Pvt Ltd. Full IP Ownership. Proprietary Technology. Made in India.

We value your privacy

Analytics cookies run only if you accept.We use cookies to make our site work and, with your consent, to measure traffic and improve the experience. You can change your choice anytime via "Cookie Settings" in the footer. Privacy Policy · Cookie Policy